View MG200_1278536.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Product Description
EnFlex Pub. No. 60ENMG200CSG
EnFlex MG-200 Control Server Gateway
The EnFlex MG-200 is a TCP/IP network host for interconnecting a variety of networked facility systems and devices. It has built-in pulse counters that allow it to receive inputs from electricity, water, gas, and other types of meters and transducers. The MG-200 is designed to reside at a remote site and connect to devices within that site through data and communication interfaces. The MG-200 provides the ability to locally manage multiple data acquisition and control systems and distribute information to and from connected devices over TCP/IP networks including the Internet. The modular architecture of the MG-200 allows it to be installed in its basic form and to be upgraded later with new networking and data interface modules as customers' requirements change and new connectivity technologies and service offerings become available. In addition, multiple MG-200 gateways can be networked together via Ethernet to provide expansion capability. The MG-200 is available as the MG-200L with a 20 MB compact flash disk and as MG-200 HD with an integral 1.2 GB hard disk drive for applications with large data storage requirements. It is also available with an optional keypad and display for configuration and monitoring of the MG-200's performance.
Key Features:
* * * * * * * * * * Standalone gateway/controller Hosts EnFlex software TCP/IP Networking with HTTP Web server Space for user programs and data 10 Mbps Ethernet port 3 pulse counters for utility meters 5 serial ports for connecting to external devices and networks 2 Expansion Ports Console Port Sensor bus port - supports up to 32 Sensor Bus (Dallas Bus) devices
MG-200 Gateway
(c) 2003 EnFlex Corp. All rights reserved. EnFlex is a trademark of EnFlex Corp. Information in this document is subject to change without notice. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, without express written permission of EnFlex Corp. EnFlex Corp. makes no warranty, expressed or implied, with regard to this publication, including but not limited to any implied warranties of merchantability, fitness for a particular purpose, and non infringement. In addition, EnFlex Corp. makes no warranty with regard to the documentation or data contained herein. EnFlex Corp. is not liable in the event of incidental, special, consequential, or any other damages in connection with or arising from furnishing, performance, or use of this publication.
1040 Whipple Street, Suite 225, Prescott, AZ 86305
Tel (928) 776-7101
Fax (928) 776-9078
EnFlex MG-200 Gateway The MG-200 is a Linux-based workstation, and provides a complete implementation of TCP/IP networking, including SLIP, PPP, NFS, etc. It supports a range of TCP/IP services such as FTP, Telnet, etc. The MG-200 is shipped with the complete EnFlex Application Software environment, including the embedded EnFlex Web Server, EnFlex Script(R) and EnFlex ConnectTM. It supports EnFlex Smart I/O controllers, LONWORKSbased EnFlex devices, and EnFlex Sensor Bus devices. Additional interfaces may be developed by users for any 3rd party equipment that communicates over RS-232 or RS-485. The MG-200 is enclosed in a rugged and compact 5" X 8.25" X 2.5" solid aluminum case that can be mounted in any position. The MG-200L can be located outdoors if it is protected from direct exposure to weather.
Network Interfaces
The MG-200 provides data interfaces to the following networks: Type Ethernet Media 10 Base T Connector RJ-45 Screw Terminals TCP/IP LONWORKS, User Defined TCP/IP-PPP (External Modem), LONWORKS, User Defined EnFlex Smart I/O, Danfoss VSD, Modbus, User Defined TCP/IP-PPP (External Modem), LONWORKS, User Defined EnFlex Smart I/O, Danfoss VSD, Modbus, User Defined User Defined, LONWORKS FTT VT100 Dallas Digital Sensor Bus Protocols
RS-232 (COM1) Three-wire Serial
RS-232 (COM2) Seven-wire Serial with Screw Terminals Modem Control RS-485 (COM3) Three-wire Serial (Twisted shielded pair) Screw Terminals
RS-232 (COM4) Seven-wire Serial with RJ-45 Modem Control RS-485 (COM5) Three-wire Serial (Twisted shielded pair) Expansion Ports Console Port Device Bus As Required Three-wire Serial Twisted Pair Screw Terminals
Screw Terminals Screw Terminals Screw Terminals
Expansion Modules
The MG-200 has two expansion ports that accommodate plug-in expansion modules. Modules are installed inside the enclosure and facilitate connection of additional networks or devices. A LONWORKS FTT-10 interface module will be available. Additional expansion modules to be developed in the future may support CEBus, HDSL, ADSL, X10, Powerline Carrier, etc.
Suggested Applications
The EnFlex MG-200 can be used in numerous applications, including the following: * * * * Stand-alone intelligent utility meter interface Gateway to third-party networks and devices Generator monitoring and control Data acquisition * * * * Real-time metering and sub-metering Facility management Environmental monitoring Security and access monitoring
Page 2
July 2003
60ENMG200CSG

▲Up To Search▲

Price & Availability of MG200

	To Download MG200 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .